Attaching Or Removing Battery Pack - Panasonic EY37C5 Instructions D'utilisation

III.
ASSEMBLY
Attaching or Removing
Battery pack
1. To attach the battery pack:
[Fig.1
Align the highlighted marker
points and attach battery pack.
Slide the battery pack until it
locks into position.
2. To remove the battery pack:
[Fig.1
Push the button and slide the
battery pack forward.
CAUTION
Do not use the 28.8 V battery
pack.
It cannot be attached properly and
may fall out.
IV.
OPERATION
Example of use [Fig.2]
• When hooking and using, take
out the hook (C) stored in the
handle (D). [Fig.3]
Pairing your Bluetooth
device for the fi rst time
1. Press the ON/OFF switch
(H) .
2. Press and hold the ON/
OFF switch (H) while the
power is on.
When you press and hold
the power button, the lamp
blinks and you are in
pairing mode.
EN
]
]
®
3. Activate Bluetooth
device according to the
device's user manual to
allow the pairing
procedure.
4. Select the device name
"EZ37C5" in the connection
settings on the Bluetooth
device side.
• Pairing is complete. As
soon as the pairing is
complete, it will be
connected and the
Bluetooth
(F) will be illuminated.
• When adding a pairing
device, start over from
step 2 again.
< When the Bluetooth
indicator (F) is on and it is
already connected to
another device. >
• Turn off the Bluetooth
connection or turn off the
power on the connected
device. Alternatively,
press and hold the ON/
OFF switch (H) to cancel
the current connection
and pair again.
- 12 -
®
on your
®
®
mode indicator
®
mode
®