Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INLET
DCW
8.4.2 Filling of the water tank
The left side cover provides access to all OKSOL hydraulic components:
After removing the lid and the aluminized insulators, access to the filling valve of the water tank is
available at the bottom (this can be identified as the valve not connected to the circulating pump,
and with a blue lever).
Steps:
1- Connect a hose to the filling valve.
2- Unscrew the black plastic cap on the upper outlet of the OKSOL unit.
3- Turn the hose on and open the filling valve.
4- Fill the water tank until water flows out of the upper outlet.
OUTLET
DHW
DRAINAGE SF. PRIMARY
EN
33
Publicité
Table des Matières
