ENGLISH
DVD Camcorder: Advanced Recording
Setting the Custom White Balance
You can adjust the white balance as you wish based on the recording
environment.
1. Set the [Mode] switch to [DISC] or [CARD].
(SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Joystick] up or down to select
<Camera>, then press the [Joystick].
5. Move the [Joystick] up or down to select
<White Balance>, then press the [Joystick].
6. Move the [Joystick] up or down to select
<Custom WB>, then press the [Joystick].
The <Set White Balance> will blink.
7. Place the subject under the desired lighting, then
press the [Joystick].
The <Set White Balance> will disappear and
the white balance setting will commence.
8. To exit, press the [MENU] button.
Custom WB icon (
) is displayed.
Notes
You can directly access the White Balance function
by using the [Q.MENU] button. page 27
The White Balance function will not operate in
EASY.Q mode.
Turn the Digital Zoom off (if necessary) to set a
more accurate white balance.
Reset the white balance if lighting conditions
change.
During normal outdoor recording, setting to Auto may provide better
results.
6
(Camera)].
OK
8
Camera Mode
►Camera
Program AE
White Balance
Auto
A
Digital Effect
Indoor
Shutter
Outdoor
Exposure
Custom WB
16:9 Wide
▼
Move
OK
Select
MENU
Exit
Set White Balance
Select
MENU
Exit
SP
STBY
30 min
FRANÇAIS
57