Use With Dect Cordless Telephones; Replacing The Battery Pack; Extra Battery Pack - Jabra GN Netcom GN9350 Guide D'installation Et D'utilisation

5. Use with DECT cordless telephones

GN 9350 GN 9330
Your headset can also be used with DECT cordless telephones (Digital Enhanced Cordless
Telecommunication), which are GAP-compatible (Generic Access Profile). You must first pair
the headset to the base unit of the cordless telephone.
Important: Your headset's authentication code is 0000, which is the same code as for most DECT
cordless telephones. Your headset will only work with cordless telephones with the 0000 code.
To pair your headset to your DECT cordless telephone:
1. Press and hold down the headset's talk button and mute button (at tip of volume control)
for 5 seconds.
–> The headset's link indicator will flash rapidly.
2. Activate the cordless telephone's GAP mode. Consult your cordless telephone's manual
GAP compatibility/pairing instructions.
–> The headset's link indicator will light for 2 seconds to indicate successful pairing.
Your headset is now ready to use with your cordless telephone. Consult your cordless
telephone's user manual for using your headset with your cordless telephone.

6. Replacing the battery pack

GN 9350 GN 9330
6.1 Extra battery pack
All 3 headset variants are equipped with a rechargeable, replace-
able battery pack designed to give you a long period of service.
Guide for basic set-up and use covers instructions for charging your
headset.
For GN 9350, an extra battery is included with your headset, dou-
bling your talk time. The extra battery is charged by placing it into
its receptor at the back of the charge tower.
GN 9330 USB
GN 9330 USB
The
14