Ase's Visual Indicators; Troubleshooting - Jabra GN Netcom GN9350 Guide D'installation Et D'utilisation

GN 9350 GN 9330
7.3 Base's visual indicators
Base action
Telephone mode button's indicator/
�ase talk button
US� mode button's indicator/
�ase talk button
Mute functionality indicator (red)
�attery indicator (4 green diodes)

8. Troubleshooting

GN 9350 GN 9330
Q: Nothing happens when I try to adjust the clear dialtone.
A: Make sure the base is set for telephone mode and the link is established (telephone but-
ton's indicator on base is flashing). Also ensure that the telephone is activated (handset is off
the hook or line button is pressed).
Q: I am getting a buzzing sound on my headset.
A: If the unit has been correctly set-up, your telephone may not be fully immune to the radio
signals the headset uses. To overcome this problem, move the headset base at least 30 cm away
from the telephone. On GN 9350, you may want to reduce the range of your unit instead.
GN 9350 GN 9330
Q: My customers say they cannot hear me.
A: Ensure the base unit is in the correct system setting by adjusting the clear dial tone switch.
You should experience a high quality dial tone from the headset. Then call a friend and adjust
your headset's microphone as described in the
For setting information on your telephone system, please also refer to www.gnnetcom.com/
gn9300/support.
GN 9330 USB
Visual indication
Lit when in telephone mode and flashing when linked up
Lit when in US� mode and flashing when linked up
Lit when mute is activated
1 LED
4 LED
Rightmost lit diode flashes when charging, leftmost diodes
are lit
Leftmost diode flashes when <30 minutes of talk time
remaining
When headset placed in cradle for charging, all diodes light
for 1 second
GN 9330 USB
when I try to adjust the clear dialtone.
GN 9330 USB
light = 25% of a full charge
lights = 100% full charge
Guide for basic set-up and
17
use.