Sound Mode Selection - Jabra GN Netcom GN9350 Guide D'installation Et D'utilisation

is ideal for most users. However, if you experience interference from other communication
devices during your calls, you may want to switch to the Low or Very Low modes. Changing to
Low or Very Low modes will reduce the range of your headset.
Power mode
Normal
Low
Very Low (V. low)
* In typical office environment
Note: The Normal power mode is the default setting.
To change the range/power mode:
1. Use 34 to locate the range/power mode menu
5 6
2. Use to select one of the 3 modes from the menu.
3. Press OK to confirm the new mode.
2.5.4 Sound mode selection
This menu is split into two sections: "Treble/Normal/�ass" and "Fixed/Switch". These two
sections are separated by a blank line. It is possible to choose one mode in each of the two
sections.
Your headset offers 3 treble/bass modes (Treble, Normal and �ass). You can change these to
suit your personal preferences or needs, and seperately determine the US� sound quality.
Sound mode
Treble
Normal
�ass
Note: The Normal mode is the default setting.
Sound mode
Fixed
Switch
Range*
Up to 150m/490 ft
Up to 30m/100 ft
Approx. 10 m/33 ft
Effect
Accentuates high tones
Accentuates all tones evenly
Accentuates lower tones
Effect
Speech quality in headset loudspeaker as
known from traditional telephones
Automatically switches to improved sound
quality. In conference call mode, automatic
switching is disabled.
Risk of interference
Average
Low
Lowest
on base display.
Benefits
Ideal for users with slight high-
frequency hearing loss
Ideal for all users
Ideal for users preferring a bass-
rich sound
Benefits
Improved talk time in US� mode
Enhanced US� sound quality
7