Publicité
Les langues disponibles
Les langues disponibles
DE Anl. 5020-0504/SCANTEMP 440 11.01.2005 15:18 Uhr Seite 5
ScanTemp 440 – Infrared Thermometer
Introduction:
The ScanTemp 440 infrared thermometer is a non-contact
infrared thermometer with Thermocouple connector. For
the infrared part, simply aim the thermometer at the tar-
get and press the measurement button to display the surfa-
ce temperature in less than a second. Plug in the specific
thermocouple (not included), ScanTemp 440 may take
contact temperature as high as 1400 °C.
The distance to target diameter ratio (field of view) is 11:1.
For accurate reading, please make sure the target size is
smaller than the spot size.
Features:
• Long Battery Life
• Use the most affordable and available battery: AAA size,
instead of the low capacity 9V battery
• Large LCD Screen, with bright amber color Backlight
• Friendly User Interface: 4-Key with trigger
• with high-end arithmetic: Max; Min and DIF; AVG mode
• Auto Power Off in 1 minutes
• Precision K type Thermocouple Thermometer inside
Safety Cautions:
EMC/RFI
• Readings may be affected if the device is operated with-
in radio frequency electromagnetic field strength of
approximately 3 volts per meter, but the performance of
the instrument will not be perma-
nently affected.
• Never point the device towards any-
one's eyes.
• Keep away from baby and children.
• Do not leave the device near objects
of high temperature.
8
ScanTemp 440 – Infrared Thermometer
• After measure high temp, the probe may remain HOT
for a while.
• Do not submerge any part of the ScanTemp 440.
• The thermometer is NOT watertight. Please keep the
unit dry and away from water.
Parts description:
• Simply aim the ScanTemp440 at the measure target and
press the Meas. key
to display the surface temperature.
Emissivity key
Down key
LCD
Up key
Mode key
Operating Intructions:
Default Screen
Battery Cover
Infrared Lens
Laser
Meas. key
Thermocouple Socket
9
Publicité
