Makita EB7650TH Instructions D'emploi page 16

3. Blower Operation
1) While operating the blower, adjust the throttle trigger / throttle lever
so that the wind force is appropriate for the work location and
conditions.
2) Adjusting engine speed.
For tube throttle model
Engine speed increases by pulling the throttle trigger (1). To decrease
the engine speed, loosen the throttle trigger.
Adjusting engine speed with the cruise control function:
The cruise control function allows the operator to maintain a constant
engine speed without operating the trigger lever.
To increase the engine speed, turn the stop control lever (2) to high
speed.
To decrease the engine speed, turn the stop control lever to low
speed.
For hip throttle model
To increase the engine speed, turn the throttle lever (1) to high
speed.
To decrease the engine speed, turn the throttle lever to low speed.
TRANSPORTING AND STORING THE BLOWER
CAUTION:
When transporting the blower, be sure to stop the engine.
●
Do not sit or stand on the blower nor put an heavy object on it. It may
damage the tool.
Maintain the blower in an upright position whenever transporting or
storing.
Transporting or storing in a position that is not upright may cause oil to spill
inside the blower engine. This may result in oil leaks and white smoke from
burning oil, and the air cleaner may become dirty with oil.
Do not drag the blower when transporting. Otherwise the blower housing or
air inlet net may be damaged, and it may cause rust.
On the air inlet net there are ground contacts (1) which discharges
*
electrostatic to the ground.
(2)
(1)
EB7650TH
16
(1)
EB7650WH
(1)