Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
PRODUCT SPECIFICATIONS
Cutting Capacity
Medium to soft materials ...........................................................................................................................................3/8 in.
Hard materials ............................................................................................................................................................1/4 in.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
Cutting bolts, chain, locks, wire shelving, steel or
aluminum rod
ASSEMBLY
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
FEATURES
OPERATION
WARNING:
Battery tools are always in operating condition. Remove
the battery pack when not in use or carrying at your side.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 8.
Insert the battery pack into the product as shown.
Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured in the
product before beginning operation.
Depress the latches to remove the battery pack.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
OPENING/CLOSING JAWS
See Figure 2, page 8.
Separate controls for opening and closing the jaws are
located on the handle of the tool.
To open the jaws, pull the upper switch trigger.
To close the jaws, pull the lower switch trigger.
WARNING:
Always close the jaws and remove the battery pack when
the tool is not in use to prevent serious personal injury.
5 — English
Publicité
Table des Matières
