LEXIBOOK Move Cam Mode D'emploi page 23

Masquer les pouces Voir aussi pour Move Cam:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Micro
able to
, and then
from
or
rchase a
h sufficient
ormatted
mpatible
button
at) and
on (10)
matted,
een
ntee that
corded
r to
with 7
Italian,
n menu.
specific
rough the
ghted.
DJA100IM1363_6Sept_V06.indb 23
3. Using the Up (7) and Down (10) buttons, navigate through the
menu and then press OK (6) when the language of your choice
is highlighted.
This camera includes three modes:
Photo Mode – Taking Photos
Video Mode – Filming Videos
Playback Mode – Viewing Videos and Photos
To change the mode, press the Mode button (8). The icon in
the upper left-hand part of your screen will change in order to
correspond to one of the 3 modes above.
FILMING VIDEOS (Video Mode)
Recording a Video
1. Long press the On/Off button (2) to turn on the camera. If you
do not directly access the Video mode, press the Mode button
(8) to access the Video mode. The Video icon
the upper left-hand corner of the screen.
2. Press the Shutter release (2, the same button as On/Off) to
start recording. The recording time is displayed in the upper
right-hand corner of the screen.
3. In order to ensure maximum battery life, you can press the
Down button (10) while filming in order to turn off the screen.
Recording continues (the power supply indicator light (3) blinks).
4. Press the Shutter release (2) again to stop filming and
automatically recording the video.
Remarks: The device automatically stops filming when the
memory card is full. The length of the video may vary according
to the amount of memory available on the Micro SD card.
Configuring the Video Mode
1. In Video mode, press the Menu button (9) to access the
configuration menu.
2. Using the Up (7) and Down (10) buttons, navigate through the
menu and then press OK (6) to configure one of the following
fields:
Movie Size
The following options are available: 1080P (30 fps), 720P
(60fps), 720P (30 fps).
The higher the resolution, the larger the image size. FPS
signifies the number of images per second and indicates the
video's level of fluidity. The higher the video resolution and FPS
rate, the more space required for its storage.
CHANGING MODE
is displayed in
23
06/09/2013 5:38 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dja100

Table des Matières