Inserting A Memory Card - LEXIBOOK Move Cam Mode D'emploi

Masquer les pouces Voir aussi pour Move Cam:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
22
DJA100IM1363_6Sept_V06.indb 22

INSERTING A MEMORY CARD

In order to record videos and photos, you must insert a Micro
SD card (sold separately) in your camera in order to be able to
record the corresponding files.
Inserting a Memory Card:
1. Turn off the camera.
2. Open the rubber cover shielding the Micro SD slot.
3. Carefully insert a Micro SD card in the Micro SD slot, and then
push it in until you hear a click.
4. To remove the card, lightly push inwards to release it from
the slot.
Remarks: Always turn off the camera prior to inserting or
removing a Micro SD card. We recommend that you purchase a
good quality Micro SD card (minimum class 4) and with sufficient
capacity for the storage of your videos and photos.
Formatting a Memory Card:
If the memory card is new, non formatted or has been formatted
by another device, format it so that its file system is compatible
with your camera.
1. Insert the card in the Micro SD card slot.
2. Press the On/Off button (2) to turn on the camera.
3. Press the Menu button (9), and then press the Mode button
(8) to access the general settings section.
4. Using the Down button (10), go to "Format" (or Format) and
press the OK button (6).
5. Select "Yes" or "No" (Yes or No) using the Down button (10)
and then press the OK button (6) to select.
Remarks: Do not remove the card while it is being formatted,
as this could damage it. Even if the card has already been
formatted, we recommend that you reformat it to guarantee that
it functions properly.
Attention: Formatting erases all photos and videos recorded
on the card. Save important files on your computer prior to
formatting a memory card.
CONFIGURING THE LANGUAGE
You can change the language of the device's menus, with 7
being available: French, English, Spanish, Portuguese, Italian,
German and Dutch.
1. Press the Menu button (9) to access the configuration menu.
Then press Mode (8) to access the configuration menu specific
to the device's general configurations.
2. Using the Up (7) and Down (10) buttons, navigate through the
menu and then press OK (6) once "Language" is highlighted.
3. Using th
menu and
is highligh
This came
Recordin
1. Long pr
do not dire
(8) to acce
the upper
2. Press th
start recor
right-hand
3. In order
Down butt
Recording
4. Press th
automatic
Remarks:
memory c
to the amo
Configuri
1. In Video
configurat
2. Using th
menu and
fields:
Movie Siz
The follow
(60fps), 72
The highe
signifies th
video's lev
rate, the m
06/09/2013 5:38 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dja100

Table des Matières