Disconnecting The Timer - Siemens S1 RKM 09012 Mode D'emploi

11
20:45
start stop
12
20 20:00
start start stop
Disconnecting the
timer
34
Press the "start" or the "stop" button: The last
set time for the option selected will flash on the
display screen, Fig. 11.
<
Press the or
timer setting. The timer is set in blocks of 15
minutes.
The "start" / "stop" option will flash until the
time set has been confirmed by pressing any
<
button except
If the timer function has already been set, then
you have 5 seconds from the moment in which
the time appears in which to modify the old
setting using the
When the "on" and "off" times set on the timer
are shown on the display screen, the two dots do
not flash.
Press the (start / stop) buttons for a period of
two seconds. The selected option (start / stop)
disappears from the display screen.
The times and functions set on the timer remain
active and the programmed operation will be
repeated at the set times until deactivated or
cancelled as described above.
button in order to alter the
or , Fig. 12.
<
and buttons.