Ways Of Releasing Air Outdoors - Siemens S1 RKM 09012 Mode D'emploi

7
Ways of releasing
air outdoors
Temporary installation
30
Another way to remove the water is:
• Turn the appliance off and wait 10 minutes for
the safety systems to reset.
• Turn drainage stopcock 90° in an anti-
clockwise direction.
• Remove the plug from stopcock 10 and insert
drainage pipe.
• Place a bowl at the drainage pipe outlet to
collect the condensed water in.
• Set the appliance to either the dehumidification
position.
Connect the diffusion duct to the hot-air
expulsion duct.
Leave the window ajar and feed the
air–expulsion nozzle through the gap. On
windows with double frames, feed the expulsion
nozzle through the gap in the middle.
Close the window as much as possible and
secure it in place using the suction pad provided.