Air Purification - Siemens S1 RKM 09012 Mode D'emploi

Air purification

9
32
Warning!
Do not forget to put the plug back in place on
the drainage stopcock and to turn the stopcock
90° in a clockwise direction before setting the
appliance to the temperature control setting.
The appliance will shed water should you fail to
do so.
When this function is in use, the display screen
always shows a temperature of 18°C. Always
remember that in order for the dehumidification
function to work properly, ambient temperature
must be at least 18°C.
8
The air inside a room is circulated through a set of
purifying filters when the appliance is set to this
function.
The appliance comes with a main filter with a
double active purifying filter. This special filter is
for:
- Smells and smoke.
- Pollen, bacteria and dust.
Put the air expulsion duct in the same position as
for dehumidification.
Set purification speed setting:
or silent , Fig. 9, by pressing the "mode"
button.
We recommend you leave the optional filters in
position regardless of the desired function setting
(cooling, dehumidification, air purification). The
appliance purifies the air more efficiently in this
way.
maximum