Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Definitions
1. Manual Fuel Pump
Provides additional fuel feed for a
cold start.
2. Fuel Filler Cap
For closing the fuel tank.
3. Fuel Tank
For fuel and oil mixture.
4. Starter Grip
The grip of the pull starter, for
starting the engine.
5. Muffler with Spark Arresting Screen
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator. Spark arresting screen is
designed to reduce the risk of fire.
6. Throttle Trigger
Controls the speed of the engine.
7. Stop Switch
Switches the engine's ignition off
and stops the engine.
8. Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
9. Bike Handle
For easy control of the machine with
both hands during cutting work.
10. Handle Support
Connects the drive shaft to the
handle bars.
11. Carrying Ring
Connects the trimmer/brushcutter to
the harness.
34
12. Throttle Cable Retainer
Secures the throttle cable to the
drive tube.
13. Carburetor Adjusting Screws
For tuning the carburetor.
14. Choke Lever
Eases engine starting by enriching
mixture.
15. Air Filter Cover
Covers and protects the air filter
element.
16. Spark Plug Boot
Connects the spark plug with the
ignition lead.
17. Machine Support
For resting machine on the ground.
18. Loop Handle (with Barrier Bar)
For easy control of machine during
cutting work.
19. Barrier Bar
Helps keep user's feet and legs
clear of the cutting attachment.
20. Drive Tube
Encloses and protects the drive
shaft between the engine and
gearbox.
21. Sleeve
Maintains minimum clearance
between control handle and loop
handle.
2
1
4
5
1
Mowing Head
2
Deflector for Mowing Heads
3
Line Limiting Blade
4
Deflector for Grass Cutting Blades
5
Grass Cutting Blade
Definitions
1.
Mowing Head
The cutting attachment, i. e.
mowing head, for different
purposes.
2.
Deflector for Mowing Heads
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting attachment
and from contact with the cutting
attachment.
FS 56, FS 56 R, FS 56 C, FS 56 RC
3
Publicité
Chapitres
Table des Matières
