Scope Of Delivery; Proper Use; Technical Description - Dometic PerfectBattery BC100 Notice D'utilisation

BC100, BC200
3

Scope of delivery

Item
in fig. 1, page 3
1
2
4

Proper use

The battery conditioner is suitable for the following uses:
• Charging device for lead batteries with a capacity of between 10 Ah and 30 Ah.
– MBCC100: 12 V battery
– MBCC200: 6 V battery
• Conditioning: Cyclic charging and discharging means that batteries with a
capacity of 10 – 150 Ah are subject to a continuous forming process.
• Back-up power supply: when changing the starter battery, all volatile memories
(on-board computer, vehicle clock, radio code, etc.) lose the data stored. The
battery conditioner can keep these volatile memories supplied with a voltage.
The stored data is then retained.
5

Technical description

If the battery conditioner is connected properly, the battery starts either charging or
discharging, depending on its charging status.
During the charging phase, the battery is supplied with a constant charging current
until the final charging voltage has been attained. In the subsequent charging phase,
the charging current decreases as the charging status of the battery increases.
When the battery is fully charged, the device switches to the discharge phase. As the
discharge current is only approx. 50 mA, this process can last many times longer
than the charging process, depending on the battery capacity.
When the lowest charging voltage has been reached, the charging process is
started automatically.
This sequence is repeated cyclically. The constant change between charging and
discharging reduces the effect of ageing on the battery.
EN
Meaning
Battery conditioner
Adapter cable with battery terminals
Scope of delivery
9