Dell PowerEdge 4210 Guide D'installation page 29

Figure 1-13. Rack Coupling Kit
1
1 gasket strip (4)
3 Allen screw (8)
5 T-handle Allen wrench
3 Remove the doors and side panels from both racks. See "Removing the
Front Door,"
"Opening and Removing the Back Doors," and "Removing the Side
Panels."
4 Place the gasket strips, with their protective backing removed, on one of
the racks adjacent to the four locations where the hexagonal spacers will be
inserted into the racks (see Figure 1-14).
NOTE:
It does not matter on which rack you place the gasket strips, as long as the
strips protect both racks from being scratched.
4
Do not cover the square holes in the rack frame with the gasket strips.
Dell™ PowerEdge™ 4210 Installation Guide
2
5
2 hexagonal spacer (4)
4 stamped-metal crescent wrench
3
27