Publicité
Les langues disponibles
Les langues disponibles
SM9
U s e r m a n u a l
7
* In order to benefit from the whole dynamic range of the SM9 monitor, the response time of the limiter is relatively long. This
function ensures the thermal protection of the speakers. The activation of the limiter leads to an automatic drop in the sound level.
Side panel:
STANDBY / ON: This switch permits to turn on or pause the monitor. In STANDBY mode, the electric
consumption is below 2W. When you activate the monitor, a cleaning cycle of the relays is made in
order to guarantee the quality of the internal contacts. The activation of the monitor will come into
effect 5 seconds after the activation of the ON mode.
FOCUS: This switch permits to use the monitor in 2 or 3-way mode. The activation of the FOCUS
mode (2-way mode) enables to deactivate the subwoofer and consequently the passive radiator. Only
the tweeter and the woofer can work. The frequency response of the 2-way monitor is 90Hz-20kHz
(+/- 3dB). The FOCUS mode is very useful to check the mix transfer on equipments with limited bass
frequencies (TV, multimedia systems, Docking station, ...). Deactivate the FOCUS mode permits to
activate the 3-way mode of the monitor. All the transducers can work now and the monitor frequency
response is 30Hz – 40kHz (+/- 3dB).
DIRECT INPUT: This switch permits to deactivate the settings situated on the back panel, except for
the high-pass filter. The activation of this selector permits to transfer directly the audio signal from
the input stage to the filtering stage.
INPUT
HPF
DIRECT
EQ'S
FOCUS
F
SM9 Focus / Direct diagram
Publicité
