Focal Professional SM9 Manuel D'utilisation page 2

SM9
I m p o r t a n t S a f e t y I n s t r u c t i o n s
An sample of this equipment has been tested and found to comply with the following European directives and international
standards:
Electromagnetic compatibility
EN 55103
EN 61000
Electrical safety
EN 60065
Important safety information
Please read carefully the following instructions and safety information. Read all warnings and follow all instructions.
• Do not remove the back panel. There are no user serviceable parts inside; please refer to qualified service personnel.
• Ensure a minimum distance of 10cm around the apparatus for sufficient ventilation.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Servicing is required when the unit has been damaged in any way, such as power cord or plug is damaged, liquid has been
spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or
has been dropped.
• Do not place naked flame sources, such as lighted candles, on the apparatus.
• Use the apparatus only in moderate climates (not in tropical climates).
• Do not expose the apparatus to dripping or splashing.
• Do not place objects filled with liquids, such as vases, on the apparatus.
• Warning for class 1 apparatus: connect apparatus only to socket with protective earth connection.
• The mains plug shall remain readily operable.
• Ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers, table-
cloths, curtains, etc.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
English