Preliminary Cleaning; Assembly Order And Preparation For Operation - Agu PMBF2 Mode D'emploi

8

PRELIMINARY CLEANING

Before the first use wash all removable parts under a flow of warm water
(use neutral cleansing agents), then wipe them dry with a soft cloth or
wait until they are dry.
REMOVABLE PARTS TO BE PRE-CLEANED
54
9

ASSEMBLY ORDER AND PREPARATION FOR OPERATION

1. Install the gasket as shown in the pic. 1, item 5.
2. Install the container for the formula (pic. 1, item 3) in such a way that
the container ledge coincides with the groove (slot) on the main unit, as
shown on picture 1, item 2 (2.1–2.6). Ensure that the container is firmly
inserted in the block, and the teeth of the container shaft and the main
unit do not hit each other (are in bond). If necessary, rotate the container
shaft manually and reinsert the container.
EN
Picture 1.
55