Domo DO7263 Mode D'emploi page 37

2
MAINTENANCE
Check the hose, dust bag and filter regularly. Empty the hose when it is clogged,
replace the dust bag when it is full and clean the filter when it is dirty.
Disposable dust bags and filters
The dust bag and the motor filter play a very important roll in the efficiency of the
vacuum cleaner. the purpose of the dust bag is to capture dirt, but at the same time
the filter needs to be porous enough to allow air to pass through. If the bag or motor
filter get clogged, no air can pass through the cleaner and no cleaning can take place
regardless of how powerful the unit is.
To keep the cleaner operating at maximum efficiency, change the dust bag
frequently and clean the filter when needed. Some fine particles can restrict the
air flow very quickly and will decrease the performance even before the bag appears
to be full. For that reason, the bag and filter may need to be changed more often
when vacuuming carpet fresheners or cleaners, powder, plaster dust or similar fine
substances.
Replacing the dust bag and cleaning the motor filter
be sure to turn off and unplug the vacuum cleaner before replacing the dust bag or
cleaning the filter. Never vacuum without the dust bag or filter in place.
1. turn off and unplug the vacuum cleaner.
2. remove the hose from the hose connection and open
the dust bag compartment by pushing the handle
upwards and lifting the lid.
3. slide the dust bag out of the frame and remove the dust
bag from the dust bag compartment.
4. If at this point you want to clean the motor filter, take
out the filter in its frame by pressing the frame down a
bit. Remove the filter from its plastic frame by pulling
apart the front and back side of the frame at the top.
Clean the filter by rinsing it under warm water. Let the
filter dry completely before reinstalling it. Reinstall
3
6
37
DO7263-64-65S
2
3