Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BENCH SANDER
BGM1022 350W
Thank you for buying this FERM product. By
doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings,
the additional safety warnings and
the instructions. Failure to follow the
safety warnings and the instructions may
result in electric shock, fire and/or
serious injury. Save the safety
warnings and the instructions for
future reference.
The following symbols are used in the user
manual or on the product:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Keep bystanders away.
Wear ear and eye protection.
Wear a dustmask.
The product is in accordance with the
applicable safety standards in the
European directives.
Special safety instructions
•
The following points need to be checked:
• Do the connecting voltage of the machine
correspond with the mains voltage.
• Are the mains lead and the mains plug in
a good condition; strong, without ravels or
damages.
•
For functional reasons the turning parts of
this machine are not covered. Therefore it is
of utmost importance to be careful. Hold the
workpiece firmly, to prevent it from slipping
from your hands. Never touch the sanding
surfaces of a working machine with your
hands.
•
Avoid the use of long extension cables.
Before you operate the machine:
•
Always keep the mains cable away from
moving parts of the machine.
•
Use safety goggles.
•
Use a dust mask.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply
corresponds to the voltage on the rating
plate.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm2. When using a cable
reel always unwind the reel completely.
Immediately switch off the machine when:
•
Excessive sparking of the carbon brushes and
verticiliosis in the collector.
•
Interruption of the mains plug, mains lead or
mains lead damage.
•
Defect switch.
•
Smoke or stench of scorched isolation.
2. MACHINE INFORMATION
Intended use
This machine combines all the advantages of a
horizontal and a vertical belt sander with those of
a disc sander. Its sturdy construction in cast iron
5
Publicité
Table des Matières
