Functional Description - Makita DMP180 Manuel D'instruction

10.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
battery in such a manner that it cannot move
around in the packaging.
11.
12.
Installing the batteries to
sive heat, explosion, or leak of electrolyte.
13.
CAUTION:
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
also void the Makita warranty for the Makita tool and
charger.
1.
2.
3.
4.
FUNCTIONAL
-
DESCRIPTION
CAUTION:
CAUTION:
CAUTION:
Failure to hold the tool and the battery
-
and result in damage to the tool and battery cartridge
2
1
Red indicator
To remove the battery cartridge, slide it from the tool
-
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
-
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION:
you or someone around you.
CAUTION:
If the cartridge does not slide in easily, it is
not being inserted correctly.
5 ENGLISH
-
3
Button Battery cartridge
If not,