Makita DMP180 Manuel D'instruction page 3

2.
Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
3.
Carrying power tools with
that have the switch on invites accidents.
4.
attached to a rotating part of the power tool may
5.
This enables better control
of the power tool in unexpected situations.
6.
lery or long hair can be caught in moving parts.
7.
dust collection can reduce dust-related hazards.
8.
9.
1.
rate for which it was designed.
2.
Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4.
Power tools are dangerous in the
hands of untrained users.
5.
Many accidents are caused by poorly maintained
power tools.
6.
7.
8.
A wrench or a key left
9.
1.
-
2.
Use of
3.
A careless action can
4.
5.
The correct
6.
7.
-
1.
-
2.
3.
-
4.
3 ENGLISH
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use of the power tool
result in a hazardous situation.
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
ment of cloth work gloves in the moving parts may
A charger that is suitable for
when used with another battery pack.
Use of any other battery
Shorting the battery termi-
irritation or burns.
may exhibit unpredictable behaviour resulting in
perature above 130 °C may cause explosion.
Charging improperly or at temperatures
This will ensure that the safety of the power
tool is maintained.
of battery packs should only be performed by the
manufacturer or authorized service providers.
Properly
-
Slippery
The entangle-
-
-
-
-
-
Service
-
-