Maintenance And Care; Precautions And Tips - Ariston ENBLH 19 F T Série Mode D'emploi

ensuring that foods are conserved for at least 9 -14 hours.
GB
*
Easy Ice
The double tub was designed to optimise space in the freezer
compartment and to ensure that ice is always readily available.
The trays can be stacked or filled and used separately.
Furthermore, the special fastening system makes Easy Ice an
extremely flexible solution, as it can be positioned in the right or
left part of the top drawers.
*
Food Care Zone 0°C
and fish freshness.Due to the compartment's low temperature
(-2/+3) food can be stored for even up to one week. It can also be
used for "cold meals." Not suitable for fruit, vegetables and salads.

Maintenance and care

Switching the appliance off
During cleaning and maintenance it is necessary to disconnect
the appliance from the electricity supply:
1. press the FREEZER OPERATION Button and SUPER FREEZE
Button for 3 seconds to switch off the product
2. pull the plug out of the socket
! If this procedure is not followed, the alarm may sound. This
alarm does not indicate a malfunction. To restore normal operation
insert the plug into the socket, press the FREEZER OPERATION
and SUPER FREEZE button and set the FREEZER OPERATION
button on the desired value.To disconnect the appliance, follow
point 1 and 2.
Cleaning the appliance
• The external and internal parts, as well as the rubber seals may
be cleaned using a sponge that has been soaked in lukewarm
water and bicarbonate of soda or neutral soap. Do not use
solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water and
soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
• During the cleaning of the slide rails for the drawers in the
freezer compartment, it may happen that the automatic drawer
closure mechanism is deactivated. To reactivate it, simply close
the drawer a little more forcefully than is usually necessary.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
*
Varies by number and/or position, available only on certain
models.
10
: A compartment designed to keep meat
I Care function
The I Care function can be enabled to optimise energy
consumption. Press and hold down the SUPER COOL and
REFRIGERATOR OPERATION buttons simultaneously for at least
6 seconds to enable this function.
On enabling the function, 4 indicator lights will go on for 2 seconds:
SUPER COOL light, SUPER FREEZE light and two temperature
lights - one for the refrigerator and one for the freezer.
After 5 seconds the interface will enter the energy saving mode
and the indicator lights will go off. The interface stays off even
when the door is opened. Just press any button to switch it on
again. Press the adjustment buttons to change the temperature.
Consumption will be optimised 48h after the function was
enabled. To disable the I Care function, switch off the product
(see description). The product can be switched on again for
normal operation.
In humid environments, when the I Care function is enabled, slight
condensation may form on the doors; normal operating conditions
are restored when the function is disabled.
Replacing the led*
Thanks to the powerful light it emits, the new LED lighting system
offers a clear view of all foods, with no shadowy areas. If the LED
needs to be replaced, please contact the Technical Assistance
Service.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power range
indicated on the cover.

Precautions and tips

! The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE..