Publicité
Les langues disponibles
Les langues disponibles
4. Installation
• Deactivate and remove the fuse of the electric circuit on which you want to install the device.
• Take the front off the rest of the device.
• Connect the wiring to the terminals at the back of the device,
according to the diagram at the right.
• Insert the device into the pattress and fix it either with the screws
of the pattress through the mounting holes at the edges,
or with the screws of the device itself that widen the attachment clamps.
• Reinstall the fuse and switch it on
• Test and regulate the device (see "5. Testing and Adjustment" below) and put the front back on.
5. Testing and Adjustment
• Set the function switch (figure 1, #5) to 'on', there should be a continuous output signal (the lamp should be on).
• Set the switch to 'off', there should be no output signal (the lamp should be off).
• Set the switch to PIR and adjust the PIR and light sensitivity (figure 1, #3 & 7) until the reaction of the device to
movement satisfies you.
• Determine how long the output signal should last by means of the timer adjustment (figure 1, #6).
The contents of this manual are subject to modifications without prior notice.
1. Inleiding
Deze IR bewegingsdetector gebruikt SMT technologie en is zeer gebruikersvriendelijk. Het toestel is zeer eenvoudig
te installeren en het is geschikt voor een groot aantal toepassingen.
2. Specificaties
Voedingsbron
Frequentie
Detectieafstand
Detectiebereik
Omgevingslicht
Activeringsduur
Werktemperatuur
Vochtigheidsgraad
Montagehoogte
Verbruik
Detectiebereik qua bewegingssnelheid
Nominale belasting
3. Werking
Onderdelen van het toestel (zie figuur 1 blz.1):
1. Detectoropening
2. Microfoon
3. Regeling gevoeligheid PIR
4. LED detectie-verklikkerlichtje
PIR500
PIR500 - PIR bewegingsdetector
220-240Vac
50-60Hz
12m max. (< 22°C) (regelbaar)
>140°
< 3lux ~ 1000lux (regelbaar)
5s ~ 420s (regelbaar)
-20°C tot +40°C
< 93% RH
0.4m tot 1.8m
0.45W (rust 0.1W)
0.6 ~ 1.5m/s
500W (220-240Vac)
2
Fig. 4
VELLEMAN
Publicité
