Step 5 - Make Electrical Connection; Step 6 - Level Refrigerator; Refrigerator Use - Haier HRT18RCW Guide De L'utilisateur

STEP 5 - MAKE ELECTRICAL
CONNECTION
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
1. Plug into a grounded 3 prong outlet.
2. Allow the refrigerator to cool for several hours before
adding food.

REFRIGERATOR USE

AIRFLOW
items:
Directly in front of the freezer fan tower vents
• Directly under the refrigerator vent
• Against the sides of the refrigerator compartment
NOTE: Place items toward the center of the shelves.

STEP 6 - LEVEL REFRIGERATOR

(If Needed)
The refrigerator must be level to maintain optimal
performance and appearance, and to avoid excess vibration
and noise.
2. Turn the leveling leg at the bottom, front of the cabinet
to raise or lower that side of the refrigerator until the
refrigerator is level side-to-side.
NOTE: Having someone push against the top of the
refrigerator takes some weight o the leveling legs, which
makes it easier to turn the legs.
slightly raise the front of the refrigerator.
NOTE: Having the front of the refrigerator raised slightly
makes it easier for the doors to close and seal properly.
4. Install the base grille, as shown.
A
8
A
A - Base Grill
A
A - Vents