Short Cord Instructions - DeLonghi DFP950 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SHORT CORD INSTRUCTIONS

A short power cord is provided to reduce the risk resulting from entanglement or tripping over a longer cord. Longer detachable
power supply cords are available and may be used if care is exercised in their use. If a longer detachable power cord or extension
cord is used (1) the marked electrical rating of the extension cord should be at least as great as the electrical rating of the applian-
ce, and (2) the longer cord should be arranged so that it will not drape over the countertop or table top where it can be pulled on
by children or tripped over unintentionally. The electrical rating of the appliance is listed on the bottom of the unit. If the appliance
is of the grounded type, the extension cord should be a grounded type 3 wire cord.
This appliance has a polarized plug. One blade is wider than the other. To reduce the risk of electrical shock this plug will fit in a
polarized outlet only one way. If the plug does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
Before plugging in
- Make sure your electricity supply is the same as the one shown on the underside of your machine.
Before using for the first time
1 Remove all packaging including the plastic blade covers from the knife blade. Take care the blades are very sharp. These covers
should be discarded as they are to protect the blade during manufacturing and transit only.
2 Wash all parts see 'cleaning'
3 Push excess cord into the back of the machine.
To purchase optional accessories please visit www.delonghi.com or call customer service listed on the warranty page.
KEY
PROCESSOR
A
power unit
B
detachable drive shaft
C
bowl
D
lid
E
feed tube
F
pushers
G
safety interlocks
H
cord storage
I
speed control with power on light
WEIGHING FUNCTION
J
on/zero button
K
display screen
L
kg/lb button
M weighing plate
ATTACHMENTS
20
knife blade
21
dough tool
twin beater geared metal whisk
22
23
thick slicing/coarse shredding disc
24
thin slicing/fine shredding disc
25
(Julienne) fine chipper disc (optional)
BLENDER
N
filler cap
O
lid
P
lid seal
Q
carafe
rasping disc (optional)
26
geared citrus press (optional)
27
mill (optional)
28
mini processor bowl (optional)
29
attachment storage
30
spatula
31
5

Publicité

Table des Matières
loading

Table des Matières