DeLonghi DFP950 Mode D'emploi page 12

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

30
ATTACHMENT STORAGE
The attachment storage carousel fits inside the bowl.
TO USE THE STORAGE CAROUSEL
1 Fit the knife blade to the bowl.
2 Then fit the whisk and discs, into the carousel
3 Fit the carousel over the knife blade and place the processor lid on top
CARE & CLEANING
- Always switch off and unplug before cleaning.
- Handle the blades and cutting discs with care - they are extremely sharp.
- Some foods may discolor the plastic. This is perfectly normal and won't harm the plastic or
affect the flavor of your food. Rub with a cloth dipped in vegetable oil to remove the dis-
coloration.
Power unit
- Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
- Store excess cord in the storage area at the back of the
S
machine
.
Blender/mill
1 Empty the carafe/jar before unscrewing it from
the blade unit.
2 Wash the carafe/jar by hand.
3 Remove and wash the seals.
4 Don't touch the sharp blades – brush them
clean using hot soapy water, then rinse thor-
oughly under the tap. Don't immerse the blade
unit in water.
5 Leave to dry upside down.
Twin beater geared whisk
- Detach the beaters from the drive head by gen-
tly pulling them free. Wash in warm soapy
water.
- Wipe the drive head with a damp cloth, then
dry.
Do not immerse the drive head in water.
All other parts
- Wash by hand, then dry.
- Alternatively they can be washed on the top rack of your dishwasher. A short low temperature
program is recommended.
SERVICE AND CUSTOMER CARE
- If the cord is damaged it must, for safety reasons, be replaced by De'Longhi or an authorized
De'Longhi service center.
- If you experience any problems with the operation of the processor, before calling for assis-
tance refer to the troubleshooting guide.
12
Q
.
R
.
Q
A
B
R
S
K
I

Publicité

Table des Matières
loading

Table des Matières