Confirmation Of Installation Of The Ieee1394B Driver - Panasonic AJ-PCD20 Mode D'emploi

IEEE1394b Driver for Windows
3) Confirmation of installation of the
IEEE1394b driver
Confirm whether the IEEE1394b driver is
installed properly
following procedures.
1
Connected this unit to a personal computer
using IEEE1394b.
2
Open Control Panel from the Start menu,
and select System
properties.
3
Select the Hardware tab in the system
properties and then press the Device
Manager button.
4
Open the tree for "Disk drive" using Device
Manager, and then press the right button for
"MATSHITA AJ-PCD20# IEEEE 1394 SBP2
Device" to open properties.
5
Select the Driver tab in properties, and then
press the Driver's details button.
6
If the following files are included in the
displayed driver file list, the IEEE1394 driver
was installed properly.
"p2sbp2.sys"
"p2cmgr.dll"
"p2csvc.exe"
7
For the following devices, confirm the
installation using the same procedures as
4 6
Nos. to .
"MATSUSHITA AJ-PCD20 #2 IEEE 1394
SBP2 Device"
"MATSUSHITA AJ-PCD20 #3 IEEE 1394
SBP2 Device"
"MATSUSHITA AJ-PCD20 #4 IEEE 1394
SBP2 Device"
"MATSUSHITA AJ-PCD20 #5 IEEE 1394
SBP2 Device"
E-13
in accordance with the
to display system
(continue)
<Note>
When using IEEE1394b, only one AJ-PCD20
can be connected to the personal computer. If
two or more AJ-PCD20 units are connected
simultaneously, operations
guaranteed.
cannot be