Inserting A P2 Card; Write-Protection Of P2 Card; Installation - Panasonic AJ-PCD20 Mode D'emploi

Inserting a P2 Card

When inserting a P2 card into the slot in the P2
drive, make sure you keep the card horizontal as
you ease it in.
Forcing the card in on an angle may cause a
problem.

Write-protection of P2 Card

A P2 card has a write-protect switch. Setting this
switch to "PROTECT" can prevent writing and
deleting of data.
Note: The write-protect switch is not effective
when the P2 card is inserted in the P2 drive.
Make sure you remove the P2 card from the P2
drive, set the switch, then re-insert the card, in
order to effect the switch setting.

Installation

There are two ways to connect the P2 drive to a personal computer (Windows/Apple Macintosh) :
1. Using the P2 drive as an external drive connected to a personal computer (Windows/Apple
Macintosh)
2. Mounting the P2 drive in a 5-inch bay of a desktop personal computer (Windows)
E-7
PROTECT
Setting the write-
protect switch to
"PROTECT" can
prevent writing and
deleting of data.
Setting the write-
protect switch to
this side allows
writing and
deleting of data.