Establishing Voltage Supply; Maintenance And Cleaning; Troubleshooting - VOLTCRAFT 51 83 70 Notice D'emploi

Establishing voltage supply

1. Make sure that the load to be connected to the power supply unit is turned off.
2. Then connect the low voltage connector to the power supply socket of your load.
3. Plug the standardised European plug to a standard mains socket.
4. The power supply unit will now start to function and the red power supply LED on the top of the
housing will light up.
Important!
Never use the power supply unit when it has been opened, shows a damaged
power cord/connection or a damaged (cracked/broken) housing. Possible danger
to life!
Regularly check the technical safety of the device e.g. for damage to the housing.
Repairs are only to be done by a trained technician. Unauthorised changes or
repairs of the device will void the warranty.
Before operation, check whether the AC line voltage is within the allowable
range.
8.

MAINTENANCE AND CLEANING

This product requires no maintenance. Never attempt to disassemble it. This product must only be
repaired by an expert or a service shop, as otherwise it might be damaged. Furthermore, the CE
approval and the warranty/guarantee would become void. Only clean the product with a soft, clean, dry
and lint-free cloth. Do not use cleaning agents as they might corrode the plastic housing and damage
the stickers. Dust can be removed using a clean, soft brush and a vacuum cleaner.
9.

TROUBLESHOOTING

You have purchased a product built with state-of-the-art technology. However, errors can occur.
Some of these errors can be relatively easily dealt with yourself:
Safety instructions are to be exactly observed.
15