Microphone Sensitivity - AUDIOropa xepton-NX TR Mode D'emploi

3.4 Monitoring function On / Off
The monitoring function enables you to hear your own voice over the system. Proceed
as follows if you wish to activate the monitoring function:
On the powered-up device, press and hold the MODE-button for 3 seconds. The sym-
bol »GRP« in the display will blink.
Press the MODE button once. The letters »SO« or »SF« blink. By using the » « and

» « buttons, select »SO« to activate the monitoring function or »SF« to deactivate it.

After the selection, wait for 3 seconds to set the selected function.
Please note:
The default setting is »SF« (monitoring deactivated).

3.5 Microphone sensitivity

The microphone sensitivity can be adjusted through 5 levels according to environ-
mental requirements:
On the powered-up device, press and hold the MODE-button for 3 seconds. The
symbol »GRP« in the display will blink.
Press the MODE button two times. The »C1« symbol in the display blinks. By using
the » « and » « buttons, select between C1 (low sensitivity) and C5 (high sensitivity).
 
Please note: The default setting is »C3«.
English 13