Publicité
Les langues disponibles
Les langues disponibles
USE
Caution: make sure that the appliance is unplugged when attaching the blades.
Hold on to the blades with the thumb and forefinger in such a way that the cutting edges
face downwards (cf. Fig. 1); then press the back-ends of the blades into the opening
provided for that purpose until they lock into place (cf. Fig. 2).
Plug in your appliance and press the on/off switch (cf. Fig. 3). Now the appliance is ready
for use. Do not use a cutting motion, simply hold the knife gently in place; it will do the
cutting automatically. Cutting takes place smoothly and without effort. With your electric
knife you can cut as needed either vertically or on a slant.
Caution: If you want to cut frozen food, use exclusively the blade provided for that
purpose (to recognize it, you only have to compare the size of the teeth because the
teeth of the special blade are larger than those of the classic one).
Do not use your knife for cutting bones. It is not meant for this purpose.
When you have finished using your electric knife, release the button and pull out the plug.
Then press the eject button. The blades can now be easily removed (cf. Fig. 4).
CLEANING
The blades are made of stainless steel and can therefore be cleaned easily.
We advise you to use warm soapy water. If you want to clean the individual blades, do so
by pushing the blades along the groove upwards until they can be removed from the
holding pin (cf. Fig. 5). To mount, reverse the process.
The blades need no special maintenance.
Sharpening is not necessary as the blades are self-sharpening due to the permanent
friction of the blades during use.
After cleaning, place the blades in the protective covering and store away.
In order to clean the appliance itself use a damp cloth and dry afterwards.
Never hold it under running water nor immerse it in water or any other liquid.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
ErP Declaration – Regulation 1275/2008/EC
We, GGV Handelsgesellschaft mbH & Co. KG, hereby confirm that our product meets the
requirements of regulation 1275/2008/EC. Admittedly, our product does not dispose of a
function to minimize the power consumption, which should according to regulation
1275/2008/EC put the product in off or standby mode after finishing the main function, but this
is practically impossible, as it would compromise the main function of the product so strongly,
that using the product would no longer be possible!
For this reason we always tell the customer in our instruction manual to unplug the appliance
immediately after use.
13
Assembly page 13/28
on the
Publicité
