Lifting From The Floor - Handi-Move 1020 Mode D'emploi

user guide
step 3. Place your hand on the user's back and press him or her gently
forward into the cups.
step 4. Use the "UP" button to apply enough pressure on the cups to
hold the user securely.
step 5. Now fit the thigh supports. Increase the pressure and check that
the user is sitting comfortably.
step 6. Lift the user. It is not necessary to lift the user far above the bed.
Simply swing the user's legs over the edge of the bed and then
move the user to the desired location.

6.6. lifting from the floor

step 1. Place the user flat on his or her back. Lower the body support
until the cups are located just above the user's pelvis.
step 2. Kneel down behind the user.
step 3. Place the user's head in you lap and use you knees and thighs to
bring the user into a sitting position.
step 4. Reach your arms under the user's arms, grasp the cups, and pull
them back and around the user's chest.
step 5. Use the "UP" button to apply a bit of pressure to the cups so the
user is held securely.
step 6. Now fit the thigh supports. Lift the user.
Body support
en p. 9