Finish Cooking - Brandt BPV6210B Manuel D'instruction

Touch the ON/OFF control. ll the indicators
for 8 seconds. After 8 seconds or after touching any key,
all the power indicators show "
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touch the heating zone selection control
Select a power level by touching the "-" or "+" control.
After setting the power level, confirm the power by touching
the heating zone selection control
seconds for automatic confirmation.
• By holding down either of "-" or "+" control, the value
will adjust up or down.
 You can directly access to the power level "9" by pressing
the " -" control key at first time.
• If you don't choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.

3.3.2 Finish cooking

Touch the heating zone selection control that you wish to switch
off.
Turn the cooking zone off by scrolling down to " 0 " or touching
and holding heating zone control key for 3 second.
A flash
".
again or wait for 5
EN-11
" "
OR