Cooking With Menu Items; Programming Menu Items; Changing Operation Mode - Hatco Rapide Cuisine Manuel D'installation Et D'utilisation

OPERATION

Cooking with Menu Items

Use the following procedure to cook using programmed menu
items in Advanced Programming Mode. Refer to "Changing
Operation Mode" in this section to change the unit between modes.
1. Push the Control Knob to start the Induction Range.
2. Touch the Button on the control
panel to toggle through the screens
on the Control Display to the Menu
screen.
3. Turn the Control Knob to highlight
the desired menu item in red, then
push the Control Knob to select the
menu item.
• The selected menu item cook screen will appear.
4. Turn the Control Knob to highlight
STRT in red, then push the Control
Knob to start cooking.
• The timer for the menu item
will start and the setting for the
active cooking control method is
shown.
• For two-stage menu items, the Control Display will begin
the second stage automatically when the first step is
complete.
5. To stop cooking during a menu item sequence, turn the
Control Knob to highlight EXIT in red, then push the Control
Knob to stop the sequence.
• The Control Display will return to the Menu screen .

Programming Menu Items

Use the following procedure to program custom one or two-
stage cooking menu items in Advanced Programming Mode.
1. Push the Control Knob to start the Induction Range.
2. Touch the Button on the control
panel to toggle through the screens
on the Control Display to the
Settings screen.
3. Turn the Control Knob clockwise
until PROGRAM is highlighted in
red, then push the Control Knob to
select PROGRAM.
• A password screen will appear.
• To enter the 3-digit password
"248", turn the Control Knob to
the first number, then press the
Control Knob to select and move
to the next number.
• The Program screen will appear.
4. Turn the Control Knob clockwise until a +ADD button is
highlighted in red, then push the Control Knob to create a
menu item.
• The Menu Item screen will
appear.
5. Turn the Control Knob clockwise
until +ADD is highlighted in red,
then push the Control Knob to
name the menu item.
• The Name screen will appear.
Preset
RICE +Add
+Add +Add
+Add +Add
Menu—Advanced
RICE STRT EXIT
10
212
Menu Item Cook—Advanced
Settings
Firmware Errors
Modes Temp Unit
Showroom Program

Changing Operation Mode

Settings—Advanced
Use the following procedure to change the operation mode of
the Induction Range. Two modes are available: Standard Mode
Program and Advanced Programming Mode.
Exit
+Add +Add
+Add +Add
+Add +Add
Program—Advanced
+Add SAVE
Menu Item—Advanced
12
6. Turn the Control Knob until BKSP is highlighted in red,
then push the Control Knob until all text in the name field is
deleted.
7. Turn the Control Knob until the first
letter for the menu item name is
highlighted in red, then press the
Control Knob to select the letter.
• Continue selecting letters using
the Control Knob until the name
is complete.
8. Turn the Control Knob until SAVE is highlighted in red, then
push the Control Knob to save the menu item name.
• The Menu Item screen will appear.
9. Program the Menu Item.
a. Turn the Control Knob until
either POWER1 or TEMP1 is
highlighted in red, depending
on the cooking control method.
Push the Control Knob to select
the cooking control method.
b. Turn the Control knob until the desired value appears for
the cooking control method. Push the Control Knob to
save the value.
c. Turn the Control Knob until TIMER 1 is highlighted in red.
Push the Control Knob to select TIMER 1.
d. Turn the Control knob until the desired value appears for
the timer. Push the Control Knob to save the value.
e. If a second stage is needed for the menu item, repeat
steps a–d for POWER2/TEMP2 and TIMER2.
f. When menu item programming is complete, turn the
Control Knob until SAVE is highlighted in red, then push
the Control Knob to save the menu item.
g. The Program screen will appear. If all menu item
programming is complete, turn the Control Knob until
EXIT is highlighted in red, then push the Control Knob
to return to the Settings screen. Touch the
the control panel to return to the active cooking control
screen.
1. Push the Control Knob to start the
Induction Range.
2. Touch the Button on the control
panel to toggle through the screens
on the Control Display to the
Settings Screen.
3. Turn the Control Knob clockwise
until MODES is highlighted in red, then push the Control
Knob to select MODES.
• A password screen will appear.
• To enter the 3-digit password
"248", turn the Control Knob to
the first number, then press the
Control Knob to select and move
to the next number.
• The Modes screen will appear.
English
Name field blank.
BKSP SAVE
Name—Advanced
RICE SAVE
Menu Item—Advanced
Button on
Settings
Firmware Errors
Modes
Showroom
Settings—Standard
Form No. IRNGM-0517