Goobay 63485 Mode D'emploi page 22

User's Manual
Tab. 15: Wall mounting
1. Remove the 2 plastic covers (C) and (D).
2. Before drilling, attend to live cables or other lines lying behind plaster, and
do not damage them.
1
2
3
4
Fig. 9: Aligning and marking
Fig. 10: Drilling the drill holes
Fig. 11: Wall mounting
.
Fig. 12: Reassembling the plastic covers
22
Risk of material damage by inappropri-
ate ambient conditions
Keep enough space around product and
to the whole system to ensure proper
>>
ventilation and mobility.
3. U se a spirit level to mark the
drill holes.
4. Mark the drill holes 1 to 4
with a pencil.
Use the wall mount (A) as template.
5. D rill the drill holes with a
10mm concrete drill 60mm
deep.
6. Plug a concrete anchor (W-B)
in each drilling hole.
7. Mount the wall mount (A) by
using the wall screws (W-A)
a nd the washers D6 (W-C),
that the arrow of the wall
mount (A) is pointing upwards.
8. R eassemble the plastic covers
( C) and (D) to the wall mount
(A).