Operating Instructions; Assembling The Blower Tubes - LawnBoss EBV260BN Manuel De L'utilisateur

OPERATING INSTRUCTIONS

ASSEMBLY
WARNING! Stop the engine and put the switch to "STOP" position before installing parts, making
adjustments, cleaning, or when not in use. Failure to do so could result in possible serious
personal injury.

Assembling the blower tubes

Warning – Always wear gloves when working with blowers
1. Place the lower blower tube (13) to the
blower FIG. 2, and rotate it to lock into
place.
2. Connect upper blower tube (12) with
lower blower tube (13), and rotate it to
lock into place. FIG. 3
3. Use screw M5×10 to secure lower
blower tube to the machine. FIG. 4
Assembling the vacuum bag
1. Remove the direct nozzle and upper blower tube from the blower.
2. Unzip the vacuum bag and place the adaptor inside as shown. FIG. 5
3. Align the locking tab on the bag adaptor with the slot in the blower housing outlet;
push the bag adaptor into the housing. Twist to lock into place. FIG. 6
4. Use screw M5×10 to secure the connection between discharging tube and machine.
FIG. 7
5. Connect the belt onto the bag, and rotate the vacuum bag until the shoulder strap is
upright.
Attention: Make sure the vacuum bag is zipped and closed before starting the unit.
Installing the vacuum tube
1. Unscrew the knob on the fan cover, and open the cover. Insert the vacuum tube no.
2 into the fan, and rotate to the fixation position. FIG. 8
2. Connect the lower vacuum tube with upper vacuum tube, and rotate it to the fixation
position.
22
S
4
2
5
6
7
8
3