Rear Panel - Dynacord PowerMate 600 Mode D'emploi

REAR PANEL

SPEAKER OUTPUTS RIGHT / LEFT
The PowerMate 600 provides professional SPEAKON con-
nectors, offering an electrical and mechanical secure con-
nection which complies to all security regulations allowing
the use of high quality speaker cables with a diameter of up
to 4 x 2.5mm2.
The DYNACORD accessory assortment includes all recom-
mended cables and connectors.
POWER
mains switch to switch the PowerMate on or off.
The PowerMate is operational when the POWER ON - LED
lights and the power outputs of thepower amplifier are acti-
vated.
Please make sure to set the master faders to their mini-
mal position or engage the STANDBY switch before tur-
ning the power on. This will save you, your audience,
and the equipment from unnecessary stress (switching
and/or feedback noise).
In case additional external equipment - like an effect
unit - is connected to the PowerMate, please proceed in
the following order when switching your equipment on:
1. external effect unit
2. PowerMate
3. external power amplifiers
When switching the power off, please proceed in the
opposite order.
36