Franke VITAL Manuel D'installation Et Mode D'emploi page 20

EN
OPERATION
Capsule Filter status indication
Filter status indication is timer based.
LED light shows if filter is working or
if battery and/ or filter cartridge need to
be replaced.
Status indication
Filter working
About 450 L
About 500 L
New battery needed.
During resetting timer
During first installation
MAINTENANCE
Replacing timer unit
See page 16/2 ABC.
Z
Repeat steps from paragraph FIRST
X
INSTALLATION to reset LED.
Replacing filter cartridge
and resetting timer
Filter must be replaced after 500 L of
water. After replacing filter cartridge,
reset timer.
To replace filter cartridge refer to
X
ilustration on page 16/3.
To reset timer for 3 seconds push
X
button inside reset timer hole. LED
light will blink 3 times. After LED light
turns OFF, system is ready.
LED light appearance
ON/ OFF green light
Light turns red when ON/OFF
LED blinks red when ON/OFF
LED light will blink green and red ON/
OFF until timer unit is replaced
LED light will blink green, green, green
– 20 – – 20 –
User Action
-
Prepare/ purchase new
filter cartridge
Replace filter cartridge
Replace timer unit or
battery
-
Periodic checks
Check connection and shower hoses
X
periodically for the following:
– Watertightness
– Corrosion
– Mechanical damage.
Use original spare parts only.
X
Replace damp or dripping hoses.
X
Replace hoses with rusty or oxidized
surfaces.
Replace hoses that show signs of
X
mechanical damage.
Flush all pipes thoroughly before
X
re-installation.