Hach SD900 Manuel D'utilisation De Base page 10

Figure 3 AWRS anchor bracket locations with mounting dimensions
1 Optional anchor brackets
Prepare the sampler
Clean the sample bottles
Clean the sample bottles and caps with a brush, water and a mild detergent. Flush the containers
with fresh water followed by a distilled water rinse.
Install a single bottle
Use a single bottle to collect one composite sample. When the bottle is full, the full bottle shut-off
stops the sample program.
1. Clean the sample bottles. Refer to
2. Install the sample bottle as shown in
Figure 4 Single bottle installation
10 English
2 Anchor brackets (2x)
Clean the sample bottles
Figure 4.
on page 10.