ITRON 133/233 Mode D'emploi page 17

Remarks for use in potentially explosive atmospheres (ATEX):
• If film of rust is possible (flying rust in the immediate product surroundings), all outer aluminium
parts have to be protected accordingly (e .g . by varnish) .
• The product must be electrically connected to adequately earthed installation .
• For installation, removing or repair of the product on site, only tools allowed for the correspon-
ding explosion area can be used .
• The product shall not be exposed to: flames, ionised radiation and ultrasound .
• Ambient temp . conditions must be considered, including possible additional heating effects
due to other devices in immediate vicinity .
17 17