Cleaning And Storage; Troubleshooting - DS Produkte XJ-13406 Mode D'emploi

EN
15. Rotate the mixing bowl anticlockwise towards the open lock symbol
device). Hold the turntable fi rmly as you do so. You can now remove the mixing bowl.

Cleaning and storage

ATTENTION!
■ Pull the plug out of the plug socket before cleaning.
■ Ensure that the appliance, the power cable or the plug does not fall into or get into
contact with water or other liquids.
■ Clean the appliance immediately after every use in order to prevent germ formation.
■ Do not use any etching or abrasive detergents for cleaning. They could damage the
surface.
1. Ensure that the appliance has been disconnected from the mains.
2. Remove the mixing bowl and the stirrers from the base unit.
3. Clean all used accessories and the mixing bowl with warm, clean water and some
detergent. Rinse all parts under running water or in the dishwasher.
4. Clean the base unit with a moist, soft cloth and dry with a soft cloth.
5. Allow to dry completely before assembling the appliance again and/or storing it in a
dry, clean place which is inaccessible for children.

Troubleshooting

If the device stops working properly, fi rst check whether you are able to correct the
problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device is not
working.
The device
automatically
deactivates.
18
Possible cause/solution
• Is the mains plug properly connected with the socket?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the device activated?
• The device is overloaded. The device is equipped with
overload protection that deactivates the device when
it overloads. If this occurs, immediately disconnect
the plug from the socket and let the device cool off for
approximately 10 minutes. Afterwards, the device is ready
for use again.
(on the basic