Cleaning And Storage - DS Produkte XJ-13406 Mode D'emploi

let the device cool off for approximately 10 minutes. Afterwards, the device is
ready for use again.
1. Place the device on a dry, even and fi rm surface with suffi cient clearance around it.
2. Place the ingredients in the mixing bowl in accordance with your recipe.
3. Press the release button and attach the mixer head.
4. Insert the mixing bowl into the basic device. Rotate the mixing bowl clockwise to-
wards the closed lock symbol
you do so.
5. Choose the inserts you want (see the "Accessories" chapter).
6. Slide the inserts into the receiving socket on the mixer head. Note the markings (L
and R) on the inserts and the receiving socket. The insert with the marking R goes in
the receiving socket with the marking R. The same applies to the insert and receiv-
ing socket with the marking L.
7. Turn the insert to the right until the locking lug fi ts in the recess provided in the re-
ceiving socket. The insert must be heard to engage in place.
8. Press the release button and fl ip down the mixer head until it clicks into the motor
unit.
9. Make sure that the switch for adjusting the speed settings is in the 0 position before
you connect the device to the mains power in order not to switch the device on ac-
cidentally.
10. Set a suitable speed setting using the switch for adjusting the speed settings:
0 Off
1 - 3
4 - 6
11. To get even mixing, stirring and kneading, the bowl can be turned by hand and be
moved back and forth with the aid of the lever (on the front of the basic device).
12. To switch off the device, move the switch for the speed settings to the 0 position.
Danger of injury due to rotating device parts! Always wait until the inserts
have come to a complete standstill before putting up the mixer head.
13. Remove the mains plug from the plug socket.
14. Press the release button and attach the mixer head.
15. Remove the inserts by pressing the eject button on the top of the mixer head.
16. Rotate the mixing bowl anticlockwise towards the open lock symbol
device). Hold the turntable fi rmly as you do so. You can now remove the mixing bowl.

Cleaning and Storage

PLEASE NOTE!
■ Clean the device immediately after every use to prevent the formation of germs.
■ Do not use any caustic or abrasive cleaning agents for cleaning. These could dam-
age the surfaces.
1. Ensure that the appliance has been disconnected from the mains.
KMC_DE-EN-FR-NL_A5_V4.1.indb 17 KMC_DE-EN-FR-NL_A5_V4.1.indb 17
(on the basic device). Hold the turntable fi rmly as
Slow mixing, stirring and kneading
Fast mixing, stirring and kneading
17 EN
(on the basic
10.09.2018 11:50:16 10.09.2018 11:50:16