Troubleshooting; Versions - DS Produkte XJ-13406 Mode D'emploi

EN
2. Remove the mixing bowl and the stirrers from the base unit.
3. Clean all used accessories and the mixing bowl with warm, clean water and some
detergent. Rinse all parts under running water or in the dishwasher.
4. Clean the base unit with a moist, soft cloth and dry with a soft cloth.
5. Allow to dry completely before assembling the appliance again and/or storing it in a
dry, clean place which is inaccessible for children.

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the
problem yourself. If the problem cannot be solved with the steps that are listed, contact
the customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
The fuse in the fuse
box is triggered.
The device
automatically
deactivates.

Versions

Product number: 03076 (purple)
Product number: 04821 (mint)
Product number: 04818 (vanilla)
Product number: 05291 (limegreen)
Product number: 05292 (red metallic)
Product number: 05313 (red)
Product number: 08842 (white)
Product number: 09272 (copper)
KMC_DE-EN-FR-NL_A5_V4.1.indb 18 KMC_DE-EN-FR-NL_A5_V4.1.indb 18
18
Possible cause
The mains plug is not
inserted correctly in the
socket.
The socket is defective.
No mains voltage is present.
Too many devices connected
to the same circuit.
No error can be identifi ed.
The device is overloaded.
The device is equipped with
overload protection that
deactivates the device when
it overloads.
Fix
Correct the fi t of the mains
plug.
Try another socket.
Check the fuse of the mains
connection.
Reduce the number of
devices in the circuit.
Contact our customer service
department.
Immediately disconnect the
plug from the socket and
let the device cool off for
approximately 10 minutes.
Afterwards, the device is
ready for use again.
10.09.2018 11:50:17 10.09.2018 11:50:17