Other Functions; Wake-Up Alarm - Alecto WS-1560 Mode D'emploi

• If both "TEMP ALERTS", together with the alert icon
alerts are enabled
• These alert functions are disabled when these indications are not shown
Outdoor temperature alert operation:
• As soon as the MIN or MAX value is exceeded, the outdoor temperature display starts flashing while
long beep tones sound for 5 seconds
• The outdoor temperature display keeps flashing and the beep tones are repeated every minute until
the temperature falls back within the limits you've set
Frost alert operation:
• As soon as the temperature reaches between +30.2°F and 37.3°F (-1°C and +2.9°C), the frost alert
symbol starts flashing while long beep tones sound for 5 seconds
• The frost alert symbol
perature returns to outside these limits

5. OTHER FUNCTIONS

5.1 Wake-up alarm

During setup the alarm time is shown in the upper right part of the display. Here you'll also see the
alarm icon when the alarm is enabled.
To set the alarm time:
1. Press and hold the ALARM button for 2 seconds, the hours of the wake-up time start flashing
2. Use the + and - buttons to set the alarm hours and then press the ALARM button
3. Use the + and - buttons to set the alarm minutes and then press the ALARM button
4. The alarm time is now set
To enable/disable the alarm functions:
• Briefly press the ALARM button to make the alarm icon
• Briefly press the ALARM button again to disable the alarm function. The alarm icon disappears
To check the alarm time:
1. Press and hold the ALARM button for 2 seconds and the wake-up time appears in the display while
the hours are flashing
2. Press 2x the ALARM button to hide the alarm time
Alarm operation:
• At the set time, the alarm will sound for up to 120 seconds:
- first 10 seconds, 1 beep per second
- the next 10 seconds, 2 beeps per second
- the next 10 seconds, 4 beeps per second
- for the next 90 seconds, continuous beeps
Press a random button at the rear of the clock to stop the alarm signal or press the SNOOZE/LIGHT
button at the rear of the weather station to activate the snooze function; "Zz" appears in the upper part
of the display and the wake-up alarm will sound again after 5 minutes
• The alarm is repeated daily until you briefly press the ALARM button and the alarm icon disappears
keeps flashing and the beep tones are repeated every minute until the tem-
35
and the frost alert are illuminated, then both
appear and enable the alarm function