Display Lighting; Specification; Cleaning And Maintenance - Alecto WS-1560 Mode D'emploi

5.2 Display lighting

On adapter power:
• Repeatedly press the SNOOZE/LIGHT button at the rear of the weather station to set the display
lighting to full intensity, half intensity or off.
• The selected setting will remain in the memory until you press the SNOOZE/LIGHT button gain
On battery power only:
• Briefly press the SNOOZE/LIGHT button at the rear of the weather station to switch the display lighting
on at full intensity.
• To save battery power, the display lighting switches off after 10 seconds
6. SPECIFICATIONS
Indoor temperature
range:
accuracy:
Outdoor temperature
range:
accuracy:
Indoor humidity
range:
accuracy:
Outdoor humidity
range:
accuracy:
Air pressure
range:
accuracy:

7. CLEANING AND MAINTENANCE

Always remove the adapter from the wall socket before cleaning the indoor unit. If you make sure to
install 2 backup batteries at the rear of the unit, you don't have to worry about losing any data.
Clean the indoor unit with a moist cloth. Never use aggressive or abrasive cleaning products. The out-
door unit may also be wiped down with a moist cloth.
The weather station requires no maintenance. However, we advise you to replace the battery at least
once a year.
0°C to 50°C / 14°F to 122°F
0°C to 40°C: ±1°C
40°C to 50°C: ±2°C
-20°C to 70°C / -4°F to 149°F
0°C to 40°C: ±1°C
-20°C to 0°C & 40°C to 70°C: ±2°C
20%RH to 95%RH
40-80%: ±5%
30-40% & 80-90%: ±8%
20-30% & 90-95%: not measured
20%RH to 95%RH
40-80%: ±5%
30-40% & 80-90%: ±8%
20-30% & 90-95%: not measured
600 hPa/mb to 1100 hPa/mb / 17.72 inHg to 32.48 inHg
±5 hPa
36