Sleep Timer; Display Dimmer - LENCO CR-205 Mode D'emploi

4. Press Preset & Clock Set button once and the current time is set.
*NOTE: The PM indicator will light when the hour is set in the PM
12:00
sleep timer from 10 to 90 minutes by pressing the Snooze & Sleep button
The unit will automatically turn off after the selected time expires.

DISPLAY DIMMER

The display can be dimmed in 2 levels. Hi and low intensity.
To change the intensity, long press the Snooze & Sleep button.
ALARM
1. In radio mode, press and hold the Power & Alarm Off button to the standby mode.
2. Press the Volume Down & Alarm-1 button or Volume Up & Alarm-2 button to
Buzzer (1or 2) or Radio (1 or 2) Alarm.
3. Press the Tuning Down & Hour Button to adjust the hour.
*The PM indicator will light when the hour is set in the PM
4. Press the Tuning Up & Minute button to adjust the minute.
*The Alarm One or Alarm Two indicator will come on.
5. Press the Volume Down & Alarm-1 button or Volume Up & Alarm-2 button.
Repeatedly to switch between Radio (FM), Buzzer (bb) or Off.
*If the alarm is set to Radio, use the Volume Down & Alarm-1 button or Volume Up &
Alarm-2 button to adjust the volume of the alarm.
6. Once the set alarm time is reached, the alarm will sound.
7. To set the other alarm, follow the above steps and choose the alarm not currently
set.
Cancelling the Alarm
1. Follow the instructions for setting the Alarm.
2. Press the Volume Down & Alarm-1 button or Volume Up & Alarm-2 button
repeatedly until indicator will no longer lit.

SLEEP TIMER

When listening to radio, press Snooze & Sleep
button to enter sleep mode. You can just adjust the
8