Energy Saving - LENCO CR-205 Mode D'emploi

When the Alarm sounds
Press Snooze & Sleep button to delay for an additional 9 minutes. The indicator will be
flashing.
Press Power button and then Press the Alarm button to cancel the Alarm. The Alarm
indicator will be disappeared.
FM RADIO
1. Press the Power & Alarm Off button to turn the clock radio on
2. Press Tuning Down & Hour button or Tuning Up & Minute button to adjust the radio
to the desired frequency.
3. Press and hold the Tuning Down & Hour button or Tuning Up & Minute button to
search for the next available frequency.
4. Press and hold the Power On/Off, Alarm Off & Source button to turn the clock radio
off.
Notes: Adjust the position of the FM antenna to improve FM Radio reception.
Saving PRESET station
1. Follow the instructions for Tuning the FM Radio.
2. Tune to the desired station
3. Press and hold the Preset & Clock Set button to save the current radio station as a
preset.
4. Press Tuning Down & Hour button or Tuning Up & Minute button to select the
preset slot.
5. Press the Preset & Clock Set button to save the preset slot.
Tuning to a Preset Radio Station
1. Follow the instructions for Tuning the radio and saving a station as a preset.
2. Press the Preset & Clock Set button to select the preset slot to recall preset radio
stations.

ENERGY SAVING

To comply with the energy saving requirement this device will automatically switch to
standby mode when no music has been playing for 10 minutes.
9